RGB and CMYK
Two colour modes: RGB builds colours from light for screens, CMYK from printing inks for paper and other printed materials
What is RGB and CMYK?
RGB and CMYK are two colour modes used to describe colours in design. RGB (Red, Green, Blue) mixes colours from red, green and blue light and is used wherever content is shown on a screen: websites, social media, email, presentations and video. CMYK (Cyan, Magenta, Yellow, Key, where Key is black) mixes colours from printing inks applied to paper and is used for printed materials such as business cards, flyers, catalogues and packaging. The same colour therefore has a different value in each mode, and on paper it may not look exactly as it does on a monitor.
Why It Matters
Mixing up RGB and CMYK is one of the most common reasons a printed flyer looks different from the design on screen: vivid colours turn dull, blue drifts towards purple and the logo no longer matches the website. Screens can display more saturated colours than a printing press can reproduce, so print artwork has to be prepared in CMYK according to the printer's requirements. Knowing the difference saves reprints and complaints and keeps brand colours consistent online and in print.
Real-World Examples
- 1Website and social media: the brand blue is defined as HEX #1E3A8A, i.e. RGB 30, 58, 138.
- 2Flyer for offset printing: the same blue is converted to CMYK in the artwork using the profile specified by the printer.
- 3Brand manual: every brand colour lists HEX and RGB values for screens and CMYK, or Pantone, values for print.
- 4A neon green that looks striking on the monitor comes out noticeably duller on paper after conversion to CMYK, because it lies outside the ink gamut.
- 5An image taken from a CMYK print PDF and uploaded to a website may show shifted colours in the browser, so web images should be exported again in RGB.
RGB vs CMYK: the key difference at a glance
The difference lies in how colour is created. RGB emits light, CMYK reflects it from paper.
- RGB is an additive model: it adds light together. More light means a lighter colour. All three channels at full strength give white, none gives black.
- CMYK is a subtractive model: printing inks absorb part of the light falling on the paper. More ink means a darker result. No ink leaves white paper.
- Use: RGB for anything displayed on a screen, CMYK for anything that is printed.
- Notation: RGB uses three numbers from 0 to 255 or hexadecimal (HEX), CMYK uses four percentages from 0 to 100%.
- Colour range (gamut): RGB screens show more saturated, brighter colours than standard CMYK print. Conversion therefore inevitably mutes some colours.
What is RGB and how does it work
Every screen pixel consists of a red, a green and a blue component. In standard 8-bit graphics their intensity is written as a number from 0 to 255, so one pixel can take 256 × 256 × 256, or more than 16.7 million, combinations. rgb(255, 0, 0) is pure red and rgb(255, 255, 255) is white.
On the web the same colour is often written in hexadecimal: #FF0000 is red again. HEX is not a separate colour model, just a shorter way of writing RGB values, used by websites, CSS and most web design tools.
To look the same on different devices, a colour also needs a colour space. The default space of the web is sRGB: according to MDN, it is assumed for any image without an embedded colour profile. Modern monitors and phones can display the wider Display P3 space, which CSS can use through the color(display-p3 …) function. For a typical business website sRGB is enough: export images in sRGB and define colours in HEX or RGB.
What is CMYK and how does it work
CMYK works with four printing inks: cyan, magenta, yellow and black (Key). The letter K refers to the key printing plate that carries the detail and text, in practice black. A colour is written as the percentage of each ink, for example C 100 M 60 Y 0 K 20.
Why a fourth ink if three should be enough in theory? Mixing cyan, magenta and yellow produces a muddy dark brown rather than a clean black, uses a lot of ink and makes small text blurry. Black ink adds depth to shadows, keeps text sharp and reduces ink consumption.
The result of CMYK printing depends on the press and the paper, which is why conversion uses ICC profiles that describe specific printing conditions. For offset printing on coated paper in Europe the current profile is PSO Coated v3 (FOGRA51 characterisation data, ISO 12647-2:2013) from the European Color Initiative, the successor to ISO Coated v2 (FOGRA39). For uncoated paper there is PSO Uncoated v3 (FOGRA52). The printer always decides which profile to use.
When to use RGB and when to use CMYK
The rule is simple: it depends on where the result ends up.
- RGB: websites and online shops, banners and ads, social media posts, newsletters, presentations, video, apps.
- CMYK: business cards, flyers, brochures, catalogues, posters, packaging, labels and other printed matter.
- Pantone (spot colours): when a brand colour must always be exactly the same in print, for example on packaging or letterheads. It is printed with a specially mixed ink rather than a CMYK build.
Printers do not handle RGB data in the same way. The Czech book printer FINIDR, for example, states in its technical specifications that it converts RGB data with an embedded profile itself and treats data without a profile as sRGB. Other printers require a finished CMYK PDF. Read the technical requirements of your printer before sending the artwork.
How to convert RGB to CMYK without surprises
- Check the printer's requirements: colour profile, PDF format (often PDF/X), bleed and minimum image resolution.
- Convert the artwork to that profile in a design application (Adobe Photoshop, Illustrator, InDesign or Affinity). Switching the mode is not enough; the target profile is what matters.
- Check the soft proof and out-of-gamut colours. Neon greens, saturated blues and bright oranges change the most.
- Respect the total ink coverage limit: for coated paper it is 300% with PSO Coated v3. A higher total of all four inks can cause smudging or slow drying.
- Set text and fine lines in black only (K 100%), not as a four-colour build, or they will blur if registration is slightly off. For large dark areas, on the other hand, printers often recommend a rich black backed by other inks; ask your printer for the exact values.
- Prepare images at sufficient resolution: the usual requirement for offset printing is 300 dpi at final size, and remember the bleed, typically 3 mm on each side.
Online tools such as Canva offer a CMYK print PDF export only on some plans. If yours does not, leave the conversion to the printer or a designer and ask for a proof before printing.
RGB, CMYK, HEX and Pantone in a brand manual
Brand colours in the colour palette and brand manual should have values for every mode: HEX and RGB for the web, CMYK for print and, where needed, Pantone for spot colours. The values are not a one-to-one automatic conversion; a designer fine-tunes them so the colour looks the same on screen and on paper.
Supply the logo in a vector format in two versions as well: RGB for the web and CMYK for print. It saves time on every job with a printer or a signage supplier.
If your brand does not have these assets yet, we can help through our graphic design service or as part of a full branding project. Why a consistent look matters is covered in our article on brand identity.
Common mistakes with colour modes
- A print PDF sent in RGB without checking with the printer, resulting in unexpectedly shifted colours.
- A CMYK image uploaded to a website, where it displays with different colours or is unnecessarily large.
- A brand colour defined by a single code only, so it is converted differently on every printed item.
- Black text built from all four inks, which prints blurry.
- Checking colours only on an uncalibrated monitor instead of a soft proof or a printed proof.
Frequently asked questions
What is the difference between RGB and CMYK?
RGB mixes colours from light and is used for screens, while CMYK mixes colours from printing inks and is used for print. RGB can show more saturated colours, so some shades become duller after conversion to CMYK.
What does K stand for in CMYK?
K stands for Key, the key printing plate that carries the detail and text. In practice it is black ink. The letter B is not used partly to avoid confusion with Blue in RGB.
Is RGB or CMYK better?
Neither is better; each serves a different purpose. Use RGB for websites, social media and presentations, and CMYK with the printer's profile for printed materials. Problems only arise when a mode is used in the wrong place.
Why do printed colours look different from the screen?
A monitor emits light and can display a wider range of colours than print, which reflects light from paper. Paper type, printing profile and monitor calibration also play a role. A soft proof in your design software or a printed proof gives a more accurate preview.
How do I convert an image from RGB to CMYK?
In a design application such as Adobe Photoshop, convert the image to CMYK using the colour profile specified by your printer, often PSO Coated v3. Then check the soft proof and any out-of-gamut colours. Simply switching the mode without the right profile is not enough.